A Blade keg is an 8L beer keg, and is specially made for and can only be used with the Blade counter top draught system.
Still have a question? Get in touch!
A Blade keg is an 8L beer keg, and is specially made for and can only be used with the Blade counter top draught system.
Still have a question? Get in touch!
A Blade keg holds 8 litres.
Still have a question? Get in touch!
Each keg measures 20.5 x 36.91 cm, and weighs 8.3 kg.
Still have a question? Get in touch!
The shelf life of a keg is 1 months. Once the keg is installed in Blade, it will stay fresh for up to 30 days.
Still have a question? Get in touch!
Store the keg on a cool place and pre-cool the kegs in the fridge at least 24 hours prior to use. The keg should ideally be chilled to 4 ⁰C.
Still have a question? Get in touch!
No. The keg should not go below zero degrees as this may damage the packaging and cause beer leakage. You will no longer be able to use the keg once frozen. DO NOT FREEZE the keg as it may explode if frozen.
Still have a question? Get in touch!
We recommend that kegs are pre-chilled in the fridge for 24 hours before use. Cooling down a keg directly in the appliance will take more than 24 hours.
If the keg is pre-chilled at 4 ⁰C, you can start serving right after placing the keg in the appliance. For best results, ensure the needle is pointing at the bottom of the temperature dial before pouring.
Still have a question? Get in touch!
Once a keg is open, you have to keep it in your Blade appliance. You can store the
open keg for up to 30 days. This will keep the keg at the right pressure and freshness.
You can take the keg out before it is empty, but once removed it should not be
consumed.
Still have a question? Get in touch!
No, the keg is specifically designed to be used with Blade. The beer or cider inside the keg needs to be kept under controlled pressure, otherwise it will not be the quality you would expect.
Still have a question? Get in touch!
No, the 8-litre keg is designed specifically for the Blade appliance.
Still have a question? Get in touch!